Specifications Closing POWERLOGIC ALLEGRA 500 PC .
The fitness is quite simple and there is no extra on the front. In practice, all you have to do is turn it on / off and reset it, as well as access the optical panel disk. The material used is SGCC material with a thickness of 0.6 mm steel.
Chassis specifications POWERLOGIC ALLEGRA 500 Slim Impression
Thick and regular
Slightly thick, usually in standard cases where only 0.5 mm thickness is used. The processing of this corpse looks very nice. The problem arose when we assembled the plate and its friends in this case, because the space provided was very limited, you would have a hard time assembling an AT sized plate. Ideally, this case will work best when used with a micro ATX chart. Fortunately, despite the limited space, this box still has a 5.25 "optical drive space and a 3.5" hard drive.
Supply with additional power
From the various performance tests we performed, comparing the inactivity of the CPU, chipset, graphics card, and various noncomputer components, and the full load temperature, there was a noticeable improvement. Especially for processor testing, it grew quite a bit.
Even if this case is equipped with two 60 mm fans on the back of the box, it can not reduce CPU heat. Additional PSU (power supply)
is an advantage for this carcass as well.
Even if this case is equipped with two 60 mm fans on the back of the box, it can not reduce CPU heat. Additional PSU (power supply)
is an advantage for this carcass as well.
Chassis specifications POWERLOGIC ALLEGRA 500 Slim Impression
Funds to be spent
We even recommend replacing the power supply with a higher quality PSU. To exchange this case you have to spend about 410,000 IDR.Chassis specifications POWERLOGIC ALLEGRA 500 Slim Impression
Form factor:
Central tower
Central tower
kg weight):
4.65
4.65
Dimensions (W x P x H mm):
435x145x350
435x145x350
Materials:
0.6 mm. SGCC steel
0.6 mm. SGCC steel
Installation without tools:
Nr.
Nr.
Can be opened:
Hand, screwdriver
Hand, screwdriver
Supported tiles:
ATX, micro ATX
ATX, micro ATX
Main clipboard on tray:
Nr.
Nr.
Helmet difference:
steel SGCC
steel SGCC
light effect:
Yes, blue (front panel)
Yes, blue (front panel)
Diet:
Po 500 W
Po 500 W
A car:
1 5.25 ", external access
0 5.25 ", inches
1 3.5 ”, access from outside
0 3.5 ", in
1 5.25 ", external access
0 5.25 ", inches
1 3.5 ”, access from outside
0 3.5 ", in
AGP / PCI expansion slots:
7
7
But you:
2 USB 2.0 ports
2 USB 2.0 ports
0 FireWire 1394
audio output x 1; microphone x 1
audio output x 1; microphone x 1
View:
-
-
system fan:
-
-
Drilling holes / trolleys:
-
-
Internal fan:
2 60 mm rear fans
2 60 mm rear fans
Manufacturer:
œMan
œMan
Dust filter: -
Outside:
Power cables
Power cables
Tekno Tik's Friends Blog . Here is the information we can give you about the specifications of PC Case Power Logic Allegra 500. I hope you find it useful. See you in the next post.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.